Speak to the experts on 03456 445 002

Master HP

Power Range

100 - 600 kVA
  • 3:3

Maximum protection and performance

The MASTER MPS range has been enhanced with the HP series available from 100 to 600kVA
MASTER HP Series provides maximum protection and power quality for data centres and industrial loads. The UPS has an IGBT-based rectifier, DSP (Digital Signal Processor) technology and provides true On-line, double conversion power protection, (VFI SS 11 - Voltage and Frequency Independent in accordance with IEC EN 62040-3).
The HP series provides exceptional operating efficiency (over more conventional thyristor rectifier-based systems), a compact footprint and easy maintenance access - all ideal for today’s critical operating environments.

Enquire About This Product

Downloads

Characteristics

As an evolution of the MASTER series, the HP features the added advantages offered by an IGBT-based rectifier assembly. This further reduces the impact of the UPS on the local supply and simplifies installation where there is limited power capacity in the form of available electrical supply rating or generator size.

The MASTER HP is classed as a ‘Zero Impact Source’ and provides:
• Low input current distortion – less than 2.5%
• High input power factor 0.99
• Power walk-in function that ensures progressive rectifier start up
• Delayed start up phased with the return of mains power supply, when several UPS are connected in the system.

MASTER HP also performs the role of a high performance filter, protecting its upstream power supply sources from any harmonics and reactive power generated by the loads powered.

MASTER HP uses the Battery Care System, also available on the MASTER MPS models, which optimises battery performance in order to extend the battery life for as long as possible.

The configuration with the output transformer, a feature of both the MASTER HP and conventional series, is characterized by the galvanic isolation of the load and the battery for greater versatility in system configurations.
As a matter of fact it allows for two network inputs (main and emergency) separate, and coming from two different power sources; this is particularly suited to parallel systems in order to ensure the selectivity between the two sources, thus improving the reliability of the entire installation.

• High output power
• Compact size: only 0.85 m2 a for 250kVA UPS
• Reduced weight
• Double load protection, both electronic and galvanic, for the battery.

The MASTER HP range is suitable for use in the widest selection of application. Thanks to the flexible configurations, accessories and options available, it is suitable for powering capacitive loads, such as blade servers.
Reliability and availability of the power supply for critical applications is guaranteed by the distributed or centralized parallel of up to 8 units for (N+1) backup or power parallel, and by all the various configurations available in the MASTER MPS range.

Technical Specifications

Rated power 100000 VA
Voltage
400 Vac three-phase
Voltage tolerance + 20% - 25%
Frequency 50/60 Hz with autorange
Frequency tolerance
45/65 Hz
Power factor 0,99
Input current 141 A
Current distorsion
<3%
Soft start 0-100% in 10
Rated voltage 400 Vac three-phase selectable 380 and 415
Voltage tolerance ± 15% (selectable from ± 10% to ± 25% from front panel)
Rated frequency 50/60 Hz (autorange)
Frequency tolerance ± 2% (selectable from ± 1% to ± 5% from front panel)
Rated current
141 A
Number phases 3
Back-feed protection yes
Overload capacity Inx10ms 14
Rated power 100000 VA
Active power
90000 W
Number phases
3 + N
Crest factor (Ipeak/Irms)
3 : 1
Waveform Sinewave
Dynamic stability
± 5% in 5 ms
Frequency same as the input (autorange)
Voltage distortion with distorcing load <3%
Voltage distortion with linear load <1%
Frequency stability ± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present
Overload 110 % 125% 150% 200% of the rated current for 10' / 1' / 7
Ripple <1%
Type Maintenance-free sealed lead-acid
Maximum recharge current 0.2xC10
Altitude max   1000 m
Color   Dark grey RAL 7035
Remote controls   EPO and bypass
Safety compliance  
EN 62040-1:2008; EN 62040-1/EC:2009; EN 62040-1/A1:2013 and Directive 2014/35/EU
EMC conformance   EN 62040-2 and Directive 2014/30/EU
Protection rating   3
Line-Interactive/Smart Active efficiency   up to 98,5%
Noise (at 1 m)   63 dBA at 1 m
Remote signals   voltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)
Operating temperature  
0 ÷ 40 °C
Relative humidity   95% no condensing
Weight
656 kg
Dimensions (h w d)
1900x800x850 mm

Can't find what you're looking for?

Call us on 03456 445 002
Email us on [email protected]